Why is there no picture on my TV screen with Sony STR-DH810?
If you're experiencing a lack of picture or an unclear picture on your TV screen or monitor when using your Sony Receiver: - Ensure you've selected the appropriate input using the input buttons. - Set your TV to the correct input mode. - Move your audio components away from the TV. - Assign the component video input correctly.
Why is there no sound from S-AIR product with Sony STR-DH810?
If there's no sound from the S-AIR product: - If you use another S-AIR main unit, place it more than 8 meters (26 feet) away from this S-AIR main unit. - Confirm the S-AIR IDs of the S-AIR main unit and S-AIR sub unit. - Confirm the pairing setting. - Place the S-AIR main unit and S-AIR sub unit closer to each other. - Avoid use of equipment that generates electromagnetic energy, such as a microwave oven. - Place the S-AIR main unit and S-AIR sub unit separately from other wireless devices. - Avoid using any other wireless devices. - Change the “RF CHANGE” setting. - Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit. - Turn off the system and S-AIR sub unit, then turn on them. - Check that headphones are not connected to the S-AIR sub unit.
Why no sound from the S-AIR receiver on Sony Receiver?
If no sound is heard from the S-AIR receiver, check that the components are connected to the receiver.
Why no sound from DIGITAL MEDIA PORT adapter on Sony STR-DH810?
If there's no sound from a component connected to the DIGITAL MEDIA PORT adapter on your Sony Receiver: - Adjust the volume of the receiver. - Turn off the receiver, then reconnect the DIGITAL MEDIA PORT adapter and/or component if they are not connected correctly. - Ensure the DIGITAL MEDIA PORT adapter and/or component device are supported by the receiver.
Why is there no sound from digital sources on Sony Receiver?
If there's no sound from digital sources (COAXIAL or OPTICAL input jack) on your Sony Receiver: - Check that the INPUT MODE is not set to “ANALOG”. - Check that the Analog Direct is not selected. - Check that the “A. ASSIGN” function is not used to reassign the audio input of another source to the selected input. - Set “ARC” to “ARC OFF” when no sound is output from TV OPTICAL IN jack during TV input.
Why is there no sound from front speakers on Sony Receiver?
If there's no sound from one of the front speakers on your Sony Receiver: - Connect headphones to the PHONES jack to check if sound is output. If only one channel outputs, the component may be incorrectly connected; ensure all cords are fully inserted into the jacks on both the receiver and the component. If both channels output to the headphones, the front speaker may not be connected correctly; check the connection of the silent speaker. - Make sure you have connected to both the L and R jacks of an analog component, and not only to either the L or R jack. Use an audio cord (not supplied).
Why is there no sound from HDMI on Sony STR-DH810?
If the sound input to the HDMI jack isn't outputting from your Sony Receiver or TV speaker: - Check the HDMI connection. - Note that you cannot listen to Super Audio CDs via HDMI. - You may need to configure the playback component; refer to its operating instructions. - Use a High Speed HDMI cable for viewing images or listening to sound during Deep Colour transmission.
Why is there no sound from surround speakers on Sony STR-DH810?
If you're experiencing no sound or very low sound from the center, surround, surround back, or front high speakers on your Sony Receiver: - Select a CINEMA STUDIO EX mode. - Check that the speaker settings are appropriate using the AUTO CAL menu or “SP PATTERN” in the SPEAKER menu, and verify sound output using “TEST TONE” in the LEVEL menu. - Adjust the speaker level.
Why is there no sound from a specific component on Sony STR-DH810?
If you're not getting sound from a specific component connected to your Sony Receiver: - Check that the component is correctly connected to the appropriate audio input jacks. - Ensure the cords used for the connection are fully inserted into the jacks on both the receiver and the component.
Why is my Sony STR-DH810 Receiver remote not working?
If your Sony Receiver remote isn't working, try these steps: - Point the remote directly at the receiver's remote sensor. - Ensure there are no obstructions between the remote and the receiver. - Replace all batteries in the remote with fresh ones. - Verify you've selected the correct input on the remote. - Note that if you're operating a programmed non-Sony component, the remote's functionality may vary depending on the component's model and manufacturer.
Essential guidelines to ensure safe operation and prevent hazards.
List of all items provided with the receiver for setup and operation.
Detailed description and location of controls and indicators on the front panel.
Explanation of various indicators that light up on the receiver's display.
Guide to all input/output jacks and sections on the rear panel.
Explanation of specific buttons on the remote for controlling the receiver.
Guidance on positioning and connecting speakers for optimal surround sound.
Step-by-step instructions for connecting speaker wires to the receiver.
Instructions for connecting the television to the receiver for audio and video.
Guide for connecting audio sources like CD players and DIGITAL MEDIA PORT.
Instructions for connecting video sources like DVD players and Blu-ray players.
Resetting receiver defaults and choosing the speaker configuration.
Steps to automatically optimize speaker settings using DCAC technology.
Using test tones to manually adjust individual speaker volume levels.
Steps for playing audio and video sources through the receiver.
Instructions for tuning into FM and AM radio stations.
Methods for tuning radio stations automatically or directly by frequency.
Choosing from various pre-programmed sound field settings for immersive audio.
Introduction to BRAVIA Sync and initial setup for compatible devices.
Enabling one-touch playback for connected components via HDMI.
Using System Audio Control to output TV sound through receiver speakers.
Using ARC for TV audio and understanding S-AIR wireless audio system.
Steps to set up S-AIR products for wireless sound transmission.
Procedure for pairing S-AIR main and sub units to prevent interference.
Selecting between digital and analog audio inputs for connected components.
Guide to accessing and adjusting various receiver settings via the menu system.
Summary of parameters and settings available in AUTO CAL and LEVEL menus.
Detailed settings for speaker patterns, sizes, and distances.
Adjusting speaker levels and dynamic range compression using the LEVEL menu.
Setting speaker assignments (SB ASSIGN) and distances for accurate sound.
Instructions for programming the remote to control other audio/video components.
How to clear remote memory and definitions of key audio terms.
Important safety guidelines regarding electrical connections, heat, and usage.
Guidelines for proper placement, operation, cleaning, and S-AIR function.
Solutions for no sound or unbalanced audio from various sources and speakers.
Resolving problems with video display and FM/AM radio reception.
Solutions for HDMI connection, sound output, and BRAVIA Sync malfunctions.
Resolving problems with S-AIR connection, sound, and reception.
Detailed specifications for audio power output and amplifier performance.
General| Impedance | 8 Ω |
|---|---|
| Audio output channels | 7.1 channels |
| HDMI | Yes |
| Output power | 200 W |
| Dimensions (WxDxH) | 430 x 157.5 x 322 mm |
| Supported video modes | 1080p |
| Product color | Black |
| Connectivity technology | Wired |
| Headphone outputs | 1 |
| Component video (YPbPr/YCbCr) in | 3 |
Weight and Dimensions| Weight | 8200 g |
|---|
To Next Page
