Sony STR-V333ES - Digital Component Hookups

Digital Component Hookups
.p
0
0
5'
c
"o
p_
¢
O
0
g
O
Connect the digital output jacks of your DVD player and
satellite tuner (etc.) t@the receiver's digital input jacks to
bring the multi channel surround souiKt @fa i'tlovie
theater into your home. To enjoy fifll eft_ct of multi
channel surround sound, five speakers (two ti'@nt
speakers, two rear speakers, and a center speaker) and a
sub woofer are required. You can also connect an LD
player with an RF OUT jack via an RF dem@dulato_; like
the Sony MOD RFI (not supplied).
TV or satellite tuner DVD or LD player (etc.)*
Optical digital cords (not supplied)
Black _i;,
Coaxial digital cord (not supplied)
Yellow =C_
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color coded pins to
the appropriate jacks on the components.
Yellow (video) Yellow (video)
White (L/audio) @_/_------_ White (L/audio)
Red (R/audio) Red (R/audio)
,_i@ Black
[_ Yellow
@
_ L FRONT R [] t
-@@@@
* Make tither coaxiaJoi"opdcaJ connections. We recommend making coaxiai connections instead olopdcaJ connections.
Please note that you cannot connect an LD player's DOLBY DIGITAL RF OUT jack directly to this unit's digital input jacks.
Yotl must first convert the RF signal to either an optical or coaxial digital signal. Connect the LD player to the RF
demodulator, then connect the RF demodulator's optical or coaxial digital output to this unit's OPTICAL or COAXIAL
DVD/LD IN jack. Refer to the instruction manual supplied with your RF Demodulator fi_r details on DOLBY DIGITAL RF
hookups.
I DVD/LD
VIDEO OUT DIGITAL VIDEO IN
,ou,A" °
LD player I RF RF demodulator
Note
When making connections as shown above, be sure to set INPUT MODE ([_ on page 24) manually. This trait may not operate correctly if
INPUT MODE is set to "AUTO."
8