Sony Trinitron KV-13VM30 - Page 58

Troubleshooting
VCR OPERATION
Symptoms
ee
Suggestions
Cannot load video cassettes
¢ Insert the cassette with the window side up and the safety tab facing you.
¢ Check if a video tape is already in the VCR.
No operation when buttons
are pressed
¢ Cancel the Quick Timer Recording.
= [
Auto play function doesn't ¢ Make sure that the receiving channel of the set is properly tuned.
work or TV programs can't be ¢ Make sure that the safety tab on the video cassette tape is still intact.
recorded * Check antenna wires, connections and direction.
Zz fj
Timer recording can't be
performed
¢ Make sure the recording start/stop time is correct.
|. * Reconnect the power plug to an AC outlet, and reset the program recordings.
There is no picture in
playback, or the playback
picture is noisy or contains
Video cassette tape was
inserted incorrectly
¢ Check that power is set to ON.
¢ Check that the video cassette tape has a recorded program.
¢ Check the tracking control (for noise streaks)
| streaks
¢ Wait a few seconds. The video cassette tape should eject itself.
5 8 Appendix