EasyManua.ls Logo

Sony TRINITRON KV-AR34M3 - Page 261

Sony TRINITRON KV-AR34M3
300 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34 Additional Information
Sony KV-AR34M36 Group R8 (GB)_4-090-194-11 (1)
continued
No picture
No sound
Good picture
No sound
Dotted lines or
stripes
Double images or
ghosts
No color
Possible causeSymptom Solutions Page
The power cord,
antenna or VCR is not
connected.
The TV is not turned
on.
The volume level is too
low.
The sound is muted.
PIP sound is selected
when PIP is displayed.
There is local
interference from cars,
neon signs, hair dryers,
power generators, etc.
Broadcast signals are
reflected by nearby
mountains or
buildings.
The antenna setup is
inappropriate.
Use of a booster is
inappropriate.
The color level setting
is too low.
The color system
setting is
inappropriate.
The antenna setup is
inappropriate.
Check the power cord, antenna and VCR
connections.
Press
?/1
(power).
Press ! (main power) on the TV to turn
off the TV for about five seconds, then
turn it on again.
Press 2 + to increase the volume level.
Press % to cancel the muting.
Press SOUND or .
Do not use a hair dryer or other
equipment near the TV.
Check the antenna setup. Contact a Sony
dealer for advice.
Use a highly directional antenna.
Use the fine tuning (FINE) function.
Check the antenna setup. Contact a Sony
dealer for advice.
Turn off or disconnect the booster if it is in
use.
Display the PICTURE menu and select
ADJUST of PICTURE MODE, then
adjust the COLOR level.
Display the SETUP menu and check the
color system (COLOR SYS) setting
(usually set this to AUTO).
Check the antenna setup. Contact a Sony
dealer for advice.
31
9
8
9
9
13
30
22
26
01GB09ADD-OCE.p65 7/25/02, 11:24 AM34

Table of Contents

Related product manuals