Adjustment
Adjustment and Setting Using a Menu
26
Adjustment
Adjustment and Setting
Using a Menu
You can set the following items using the relevant menu:
• Confirming information (INFORMATION) (page 28)
• Adjusting the print quality (PRINT QUALITY)
(page 28)
• Calibration (CALIBRATION) (page 31)
• Selecting a gamma curve (GAMMA SEL) (page 33)
• Setting the IP address (SYSTEM SETTINGS)
(page 33)
Notes
• The next printout will be printed with the values most
recently set. You cannot adjust the setting during
printing. Once you have adjusted and stored the
settings, the printer operates according to those
settings until their values are modified.
• If you do not press any button for approximately 15
seconds after pressing the MENU button, the printer is
automatically reset to standby status (where the size
and remaining amount of film sheets are displayed).
To Next Page
Loading...
