Adjustment
Other Settings
34
For detailed information on how to set the IP address
and so on, refer to “Setting the IP Address Using the
Menu” described in the other section of this manual
“Setup Manual.”
Note
If you set the wrong IP address, sub-net mask and
gateway address, the printer cannot be connected to the
LAN network. Be sure not to change those settings
except the system administrator. When you need to
change those settings, contact your nearest Sony dealer.
Other Settings
The following settings can be changed, but not by using
the menu. However, you cannot change the following
settings by yourself. To change the following settings,
contact your nearest Sony dealer.
Item Default setting
Making the buzzer sound when error
messages such as SET FILM,
REMOVE PRINTS and so on, are
displayed.
Off (No buzzer)
Reversing the printouts. Off (Do not reverse the
printouts.)
Attaching the L and R marks on each
printout.
Off (Do not attach L
and R marks.)
Printing caption on the top and
bottom of the black frame.
On (Print captions.)
Changing the gamma curve of USER
2 to USER 20.
For USER 2 to USER
5: Each gamma curve
has been preset to the
proper settings based on
the SONY 1 gamma
curve.
For USER 6 to USER
20: The same setting as
the one of SONY 1 is
applied.
To Next Page
Loading...
