Why won't my Sony VPL-CX71 power on?
If your Sony Projector won't power on, it may be because the power was recently turned off and on too quickly. Wait about 60 seconds before trying to turn it on again. Also, ensure that the lamp cover and the air filter cover are securely closed and attached.
What does it mean when the LAMP/COVER indicator lights up on my Sony VPL-CX71?
If the LAMP/COVER indicator lights up on your Sony Projector, it could mean that the lamp has reached the end of its life and needs to be replaced. Alternatively, the lamp may be overheating. Wait for 60 seconds to cool down the lamp before turning the power on again.
What does it mean when the LAMP/COVER indicator flashes on my Sony Projector?
If the LAMP/COVER indicator is flashing on your Sony Projector, it means the lamp cover or the air filter cover is detached. Attach the cover securely. It could also indicate that the lens protector does not open due to a problem. In that case, slide the lens protector by hand, and then press the I/1 key.
What to do if the picture is not clear on my Sony VPL-CX71 Projector?
If the picture on your Sony Projector is not clear, try adjusting the focus. If that doesn't work, condensation may have occurred on the lens. If so, leave the projector on for about two hours to clear the condensation.
What to do if my Sony VPL-CX71 Projector Remote Commander does not work?
If the Remote Commander for your Sony Projector isn’t working, replace the batteries with new ones. Also, check that the COMMAND ON/OFF switch is set to ON and the PJ/NETWORK selector switch is set to PJ.
What to do if the picture is too dark on my Sony VPL-CX71 Projector?
If the picture on your Sony Projector is too dark, adjust the contrast or brightness in the “Adjust Picture...” menu. If that doesn't help, the lamp may be burnt out or dimming, and you may need to replace it with a new one.
Why is there no sound from my Sony VPL-CX71?
If you're not getting any sound from your Sony Projector, first, check all cable connections to ensure they are properly connected. Make sure you are using a no-resistance stereo audio cable. Also, verify that the audio is not muted by pressing the AUDIO MUTING key. Finally, adjust the sound using the VOLUME +/– key on the Remote Commander or adjust “Volume” in the PICTURE SETTING menu.
Why is there no picture on my Sony VPL-CX71 Projector?
If there is no picture on your Sony Projector, verify that all cable connections are correct. Ensure your projector is compatible with DDC2B (Digital Data Channel 2B). If it is, connect the projector to the computer, turn on the projector, and then start the computer. Also, select the correct input source using the INPUT key and press the PIC MUTING key to release picture muting, if activated.
How to fix incorrect color balance on Sony VPL-CX71 Projector?
To correct the color balance on your Sony Projector, first, adjust the picture settings. If the issue persists, check that the “Color System” in the SET SETTING menu matches the color system being input.
General| Resolution | 1024 x 768 (XGA) |
|---|---|
| Display Technology | 3LCD |
| Projection Size | 30 to 300 inches |
| Lamp Life | 2000 hours (normal), 3000 hours (eco) |
| Lamp Type | UHP |
| Zoom | 1.2x |
| Input Ports | S-Video |
To Next Page
