EasyManua.ls Logo

Sony VPL-FE40L - Specifications

Sony VPL-FE40L
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Specifications
Others
Specifications
Optical characteristics
Projection system
3 LCD panels, 1 lens, 3 primary
color shutter system
LCD panel VPL-FE40: 0.79-inch SXGA+
panel, 4,410,000 pixels (1400 ×
1050 × 3)
VPL-FX40: 0.79-inch XGA panel,
2,359,296 pixels (1024 × 768 ×
3)
Lens 1.3 times zoom lens (powered)
f 30.6 to 39.7 mm/F1.66 to 2.18
* The lens is not supplied with the
VPL-FE40L/FX40L.
Lamp 275 W Ultra high pressure lamp
Projected picture size
40 to 600-inches (measured
diagonally) (When the VPLL-
1008 is used: 60 to 300-inch)
Light output 4000 ANSI lumen
(When the Lamp Mode is set to
“High.”)
Throwing distance for VPL-FE40/FX40 (When
placed on the floor.)
When an SXGA+ (VPL-FE40)/
XGA (VPL-FX40) signal is
input
40-inch: 1.5 to 1.9 m
(4.9 to 6.2 feet)
60-inch: 2.3 to 2.9 m
(7.4 to 9.5 feet)
80-inch: 3.0 to 3.9 m
(9.9 to 12.7 feet)
100-inch: 3.8 to 4.8 m
(12.5 to 15.9 feet)
120-inch: 4.6 to 5.8 m
(15.0 to 19.1 feet)
150-inch: 5.7 to 7.3 m
(18.8 to 23.9 feet)
200-inch: 7.7 to 9.7 m
(25.2 to 32.0 feet)
300-inch: 11.6 to 14.6 m
(37.9 to 48.0 feet)
400-inch: 15.4 to 19.5 m
(50.6 to 64.1 feet)
500-inch: 19.3 to 24.4 m
(63.3 to 80.2 feet)
600-inch: 23.2 to 29.4 m
(76.0 to 96.3 feet)
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system NTSC3.58/PAL/SECAM/
NTSC
4.43/PAL-M/PAL-N/
PAL60 system, switched
automatically/manually
(NTSC
4.43 is the color system used
when playing back a video
recorded in NTSC on a
NTSC
4.43 system VCR.)
Resolution VPL-FE40: 750 horizontal TV
lines (Video input)
1,400 × 1,050 dots (RGB input)
VPL-FX40: 750 horizontal TV
lines (Video input)
1,024 × 768 dots (RGB input)
Acceptable computer signals
1)
fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
UXGA 1600 × 1200
fV: 60 Hz)
1)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB 50/60 Hz, Progressive
component 50/60 Hz, DTV
(480/60i, 575/50i, 480/60p,
575/50p, 720/60p, 720/50p,
1080/60i, 1080/50i, 1080/60p,
1080/50p), Composite video, Y/
C video
Speaker Stereo speaker system, 40 × 70
mm (1
5
/8 × 2
7
/8 inches)
Speaker output
1.8 W × 2
Input/Output
VIDEO IN VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
AUDIO: phono type × 2
rated input 500 mVrms, input

Other manuals for Sony VPL-FE40L

Related product manuals