Sony VPL-FE40L - Optional Accessories

48
Specifications
impedance more than 47
kilohms
INPUT A/B Analog RGB: HD D-sub 15-pin
(female)
R: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync: 1 Vp-p ±2 dB sync
negative (75 ohms terminated)
B: 0.7 Vp-p ±2 dB (75 ohms
terminated)
HD: Horizontal sync input: TTL
level, high impedance, positive/
negative
VD: Vertical sync input: TTL
level, high impedance, positive/
negative
AUDIO: Stereo minijack, rated
input 500 mVrms, input
impedance more than 47
kilohms
INPUT C Analog RGB/component: 5BNC
(female)
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB (75 ohms
terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/B-Y: 0.7 Vp-p ±2 dB (75
ohms terminated)
HD:
Horizontal sync input: TTL
level, high impedance, positive/
negative
VD:
Vertical sync input: TTL level,
high impedance, positive/
negative
AUDIO: Stereo minijack
rated input 500 mVrms, input
impedance more than 47
kilohms
INPUT D Digital RGB/Y C
B (PB) CR (PR):
HDMI
INPUT E NETWORK
RJ-45: 10BASE-T/100BASE-
TX
OUTPUT MONITOR OUT: HD D-sub 15-
pin (female)
R, G, B: Gain Unity: 75 ohms
HD, VD: 4 Vp-p (open), 1 Vp-p
(75 ohms)
AUDIO OUT (variable out):
Stereo minijack
1 Vrms (When the volume is
maximum and an input signal is
500 mVrms), output impedance
5 kilohms
REMOTE RS-232C: D-sub 9 pin
CONTROL S IN/PLUG IN POWER
Stereo minijack
General
Dimensions 532 × 145 × 352 mm (21 × 5
3
/
4
×
13
7
/
8
inches) (w/h/d) (without
the projection parts)
Mass Approx. 9.8 kg (21 lb 1 oz) (VPL-
FE40/FX40)
Approx. 9.0 kg (19 lb 13 oz) (VPL-
FE40L/FX40L)
Power requirements
AC 100 to 240 V, 4.1 - 1.7 A,
50/60 Hz
Power consumption
Max. 400 W
(in standby (standard): 15 W in
standby (low): 0.5 W)
Heat dissipation
1365 BTU
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Size AA (R6) batteries (2)
Lens cap (1) (VPL-FE40/FX40)
Lens hole cover (1) (VPL-FE40L/
FX40L)
AC power cord (1)
CD-ROM (Operating Instructions,
Application Software) (1)
Quick Reference Manual (1)
Safety Regulations (1)
Security Label (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp
LMP-F270 (for replacement)
Projector Suspension Support
PSS-610
Presentation Tool
RM-PJPK1
Projection Lense
Fixed short focus lens VPLL-1008
(for rear projection (Optical
Axis Angle: 0 degree))