Sony VPL-HS1 - Step 4: Selecting the Menu Language

GB
12
Step 4: Selecting the Menu Language
Connections and
Preparations
Step 4:
Selecting the
Menu Language
You can select one of nine languages for displaying
the menu and other on-screen displays. The factory
default setting is English.
1 Plug the AC power cord into a
wall outlet.
The ON/STANDBY indicator lights in red and
the projector goes into standby mode.
2 Press the [/1 (on/standby)
switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3 Press MENU.
The menu appears.
The menu presently selected is shown as a
yellow button.
4 Press M or m to select the SET
SETTING menu, and press
, or ENTER.
The selected menu appears.
SIDE
SHOT
VOLUME
MS SLIDE
DYNAMIC STANDARD LIVING
USER 1
MENU
ENTER RESET
USER 2 USER 3
OFF
APA
INPUT
VIDEO MEMORY
+
–
+
–
3
2
4,5,6
PICTURE CTRL
CONTRAST:
BRIGHT:
COLOR:
HUE:
SHARP:
D.PICTURE:
COLOR TEMP:
COLOR SYS:
VOLUME:
VIDEO 1
80
50
50
50
50
OFF
HIGH
AUTO
30
MENU
ENTER
SET SETTING
STATUS:
INPUT-A:
LANGUAGE :
POWER SAVING :
VIDEO 1
ON
COMPONENT
ENGLISH
OFF
or