EasyManua.ls Logo

Sony VPL-HS1 - Page 35

Sony VPL-HS1
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
GB
Troubleshooting
Others
The picture flickers. DOT PHASE in the INPUT SETTING menu has not been adjusted
properly.
c Adjust DOT PHASE in the INPUT SETTING menu properly (1 page
19).
On-screen display does not appear. STATUS in the SET SETTING menu is set to OFF.
c Set STATUS in the SET SETTING menu to ON (1 page 20).
No sound. Cable is disconnected or the connections are wrong.
c Check that the proper connections have been made (1 pages 8 and 9).
VOLUME setting is not correct.
c Adjust VOLUME in the PICTURE CTRL menu, or press VOLUME + on
the remote control.
When sound is input through the
AUDIO connector, sound comes
through one channel only.
Monaural sound is being input through the AUDIO connector.
c Input stereo sound.
The remote control does not work. Batteries cound be weak.
c Replace the batteries (1 page 5).
The polarity is not correct.
c Insert the batteries with correct polarities (1 page 5).
The Memory Stick cannot be inserted
into the Memory Stick slot.
The Memory Stick is not facing in the correct direction.
c Insert the Memory Stick with the arrow mark pointing toward the Memory
Stick slot of the projector.
A still picture in the Memory Stick
cannot be rotated or deleted.
The write-protect tab on the Memory Stick has been set to LOCK.
c Cancel the lock (1 page 22).
The picture is protected.
c Release the protect in the Index screen (1 page 29).
The Memory Stick cannot be
formatted.
The write-protect tab on the Memory Stick has been set to LOCK.
c Cancel the lock (1 page 22).
The Memory Stick is broken.
c Use another Memory Stick.
When the slide show is made, the MS
flashes.
Pictures with different resolutions are used for the slide show.
c Set STATUS of the SET SETTING menu to OFF (1 page 20).
When the slide show is made, a black
picture appears.
When pictures with different resolutions are used, a black picture appears.
c Set the resolution of the pictures to the same setting.
The thumbnails are not displayed. The pictures are the JPEG format but not DCF-compatible.
c Use the DCF-compatible pictures.
Symptom Cause and Remedy

Table of Contents

Related product manuals