EasyManua.ls Logo

Sony VPL-HS50 - Specifications

Sony VPL-HS50
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52 Specifications
Specifications
System
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.73-inch TFT LCD panel with
micro-lens array, 2,764,800
pixels (921,600 pixels × 3)
Lens 1.6 times zoom lens (manual)
f21.3 – 34.1 mm/F2.4 – 3.16
Lamp 135 W UHP type
Projection picture size
40 to 200 inches (measured
diagonally)
Color system NTSC
3.58/PAL/SECAM/NTSC4.43/
PAL-M/PAL-N/PAL60 system,
switched automatically/
manually (PAL60 system not
switched manually)
Acceptable video signals
15 kHz RGB/component 50/60
Hz, Progressive component 50/
60 Hz, DTV (480/60i, 575/50i,
480/60p, 575/50p, 720/60p,
720/50p, 1080/60i, 1080/50i),
1080/24PsF, Composite video,
Y/C video
Acceptable computer signals
fH: 19 to 72 kHz
fV: 48 to 92 Hz
Maximum resolution WXGA
1280 × 768, fV: 60 Hz
Input
Video input VIDEO: phono type
Composite video: 1 Vp-p±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p ±2 dB (NTSC)
(75 ohms terminated)
burst 0.3 Vp-p±2 dB (PAL)
(75 ohms terminated)
Y/P
B/CB/PR/CR
Component: phono type
G with Sync/Y: 1 Vp-p±2dB
sync negative (75 ohms
terminated)
B/C
B/PB: 0.7 Vp-p±2dB
positive (75 ohms terminated)
R/C
R/PR: 0.7 Vp-p±2 dB
positive (75 ohms terminated)
HDMI Digital RGB/Y/C
B(PB)CR(PR)
INPUT A HD D-sub 15-pins
Analog RGB/component:
R/C
R (PR): 0.7 Vp-p±2 dB
(75 ohms terminated)
G: 0.7 Vp-p±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p±2 dB
sync negative (75 ohms
terminated)
B/C
B (PB): 0.7 Vp-p±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync
input: TTL level, positive/
negative
Horizontal sync input: TTL
level, positive/negative
VD: Vertical sync input: TTL
level, positive/ negative
Ethernet (VPL-HS51 only)
RJ-45
10BASE-T/100BASE-TX
TRIGGER Minijack
Power on: DC 12 V, output
impedance: 4.7 kilohms
Power off: 0 V
General
Dimensions 348 × 135 × 360 mm
(13
5
/8 × 5
7
/8 × 14
5
/8 inches) (w/
h/d)
Mass VPL-HS50:
Approx. 5.6 kg (12 lb 6 oz)
VPL-HS51:
Approx. 5.7 kg (12 lb 6 oz)
Power requirements
AC 100 to 240 V, 0.8–1.95 A,
50/60 Hz
Power consumption
VPL-HS50:
Max. 195 W
Standby mode: 3 W
ECO mode: 0.5 W
VPL-HS51:
Max. 195 W
Standby mode: 4.5 W
ECO mode: 0.5 W
Operating temperature
0°C to 35°C (32°F to 95°F)

Other manuals for Sony VPL-HS50

Related product manuals