21Step 4: Selecting the Menu Language
Connections and Preparations
Step 4: Selecting the Menu Language
You can select one of fifteen languages for displaying the menu and other on-
screen displays. The factory default setting is English.
Tip
You can operate the menu using the M/m/</, (arrow) buttons on the side panel of
the projector instead of the M/m/</,/ENTER buttons on the remote control.
1 Plug the AC power cord into a wall outlet.
The ON/STANDBY indicator lights in red and the projector goes into
standby mode.
2 Press the I/1 (on/standby) switch to turn on the projector.
The ON/STANDBY indicator lights in green.
3 Press MENU.
The menu appears.
INPUTLIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
USER 3USER 1
ADJ PIC
MENUAPA
RCP
RESET
WIDE MODE
ENTER
REAL COLOR PROCESSING
2
4-6
3
MENU
Picture
Signal
Function
Setup
Installation
Information
Picture Mode :
Cinema
Adjust Picture
RCP :
Off
Sel : Set : Back : Exit :
To Next Page
