The Tape Player
The Tape Player
23
Tip
To check the total
recording time on the
upper side and the
reverse side:
Press ENTER•
MEMORY CHECK
before starting
recording. Each time
you press the button,
the display changes as
follows: “total
recording time on the
upper side” n “total
recording time on the
reverse side” n “the
total track number and
the tape length you
need to record the
whole CD.”
3 To change the recording time, press = or +.
If you do not change the recording time, skip to
step 4.
Example: If you input “40” minutes for the
recording time, the maximum recording time for
each side is 20 minutes.
Track Nos.: 1 2 3 4 5 6 7
Length: 01:20 02:30 03:40 04:50 05:10 04:20 01:30
(minutes) Side A (17:30) Side B (5:50)
4 Press ENTER•MEMORY CHECK.
5 Insert a blank tape into the tape compartment.
6 Press r/P and then (.
Recording will start on the upper side
automatically.
To Next Page
Loading...
