The Tape Player24
Recording the tracks on CD by specifying the tape length
(continued)
Recording programed tracks (EDIT PGM)
The first half of the programed tracks will be recorded
on one side of the tape, and the second half will be
recorded on the other side. According to the tape you
use, you can set the total recording time.
1 Press p on the CD section until “Cd” appears in
the display.
2 Press EDIT to display “E-PGM”.
EDIT
6 PUSH
OPEN/CLOSE
=, +
(
pr/P
ENTER
MEMORY
CHECK
.
Tips
• You can edit a CD
having 20 tracks or
fewer.
• We recommend that
you use AC power as
the power source for
optimum recording
quality.
Note
Do not open the CD
tray while editing; the
settings for recording
will be erased. If you
do, start from step 1
again.
p
To Next Page
Loading...
Need help?
General
