5
Placing into operation
Scope of supply
The supplied parts are indicated in the Sophos Access Points Quick Start
Guide.
Mounting instructions
All access points can be put on a stable horizontal surface or can be
mounted on the wall. Please take note of the following security hints:
Warnings and precautions
The access point can be operated safely if you observe the following notes
and the notes on the device itself.
General precautions
Review the electrical and general safety precautions that came with the
components you are adding to your access point. Allow the power supply
modules to cool before touching them.
Sophos AP10 mounting instructions
The Sophos AP10 can be mounted on the wall. Screws are not included in
delivery. Use only screws whose dimensions correspond with the mounting
holes on the back side.
Connection and configuration
How to connect the access point to the internal network is described in the
Sophos Access Points Quick Start Guide.
Sophos AP10 Operating Instructions
To Next Page
Loading...
Need help?
General
