3.3: TABLET SCREENS
SOFTWARE > TABLET SOFTWARE SCREENS
3.3: TABLET SOFTWARE SCREENS
Ui12, Ui16 User Manual
AUX SENDS
AUX SENDS is where the aux mixes are
created. The faders determine the level of
signal sent to the selected aux bus. Select
an aux mix from those available at the
top of the view to adjust that mix. The Aux
Master will be available on the right hand
end of the screen, next to the Master
Channel.
EDIT
The EDIT page provides access to audio
processing such as EQ, DYNAMICS, and
FX.Thespecicaudioprocessingtabs
available depend on the selected channel
type. For example, the aux outputs and
Master Channel include Graphic EQ.
FX SENDS
FX Send faders determine the mix that is
sent to the selected FX processor. First,
select which effect you wish to adjust
using the tabs, then adjust the faders
to increase or decrease the amount of
reverb you would like added to each input
channel.
Select EDIT to edit the selected FX
algorithm.
MOREME
MOREME allows users to assign their
own personal channel, and create a
personal monitoring mix with a single
large fader. MOREME channel names are
highlighted in orange. To assign an input
channel to the MOREME fader,
long-press a channel name and select the
ASSIGN ME function. Use the same
process to assign an Aux bus as ‘ME
OUT’. In Tablet software, select MOREME
in the Slideout panel, or turn the ipad to
a portrait view to access the MOREME
screen.
To Next Page
Loading...
Need help?
General
