SA165 Soleman User’s Guide 12
Likewise, when the end of a list is reached, the word “End” will be displayed in the lower right of the
LCD:
Basic List Navigation
Just like in Scene Mode, use the Previous and Next footswitches to navigate through the List. The
Previous footswitch activates the previous Scene in the list, and the Next footswitch activates the
next Scene in the list.
List Search
Press the Search footswitch to activate List Search mode. When List Search mode is active, the
Search LED will begin to blink. While in Search mode, you can navigate through the List using the
Next and Previous footswitches without sending out the corresponding MIDI messages. When you
have reached the desired position in the List, press the Search footswitch again. This will exit List
Search mode and send the MIDI message corresponding to the current Scene.
To Next Page
Loading...
