Source Audio Soleman - External Footswitch Connections; Connecting External Footswitches

SA165 Soleman User’s Guide 27
WARNING! A factory reset will delete ALL user data, including all Scenes, Lists, Panels, and Macros.
Be very cautious not to perform a factory reset unless you are willing to lose all of your user data!
External Footswitch Connections
The Soleman supports up to two external footswitches that can be used to improve navigation in List
mode and Panel mode, or to use as an external tap tempo input.
Momentary, single-pole single-throw (SPST) switches are supported. The input jack on the Soleman
accepts a 3-conductor TRS, 3.5 mm plug. Switch 1 should be connected to the tip conductor and
Switch 2 should be connected to the ring conductor. Standard footswitches such as the FS-6 Dual
Footswitch from Boss are compatible.
With a Stereo-to-Mono splitter cable, two individual footswitches can also be used.
F
a
c
t
o
r
y
R
e
s
e
t
I
n
P
r
o
g
r
e
s
s
.
.
.