Source Audio Soleman - MIDI Input Control; MIDI Input Function Mapping

SA165 Soleman User’s Guide 28
MIDI Input Control
The Soleman supports a limited number of functions to be controlled via MIDI Input. MIDI messages
received either via the 5-pin DIN MIDI Input Jack or the USB-MIDI connection will have the same
result. This allows users to recall Scenes, Set Lists, or Panels via MIDI so that the Soleman can be
remotely controlled from external hardware or software. The following table describes the MIDI
Input function mapping:
MIDI Message Type
Data Value 0
Data Value 1
Function
Program Change (PC)
0-63
N/A
Recall Panels 0-63, respectively
Note On
0-127
Any
Recall Scenes 0-127, respectively
Continuous Control (CC)
102*
0, 1, 2
Set Mode (0=Scene, 1=Set List, 2=Panel)
Continuous Control (CC)
103*
0-127
Recall Scenes 0-127, respectively
Continuous Control (CC)
104*
0-63
Recall Set Lists 0-63, respectively
Continuous Control (CC)
105*
0-63
Recall Panels 0-63, respectively
*Continuous Control functions are available with Firmware Version 1.06 or later.