SA165 Soleman User’s Guide 11
List Mode
List Mode is similar to Scene Mode in many ways: scenes can be selected using the Previous and Next
footswitches, and each scene will output (by default) a corresponding MIDI Program Change message.
The advantage of List Mode is that the user has control of the order of the Scenes. Users can create
up to 64 custom Lists, each containing up to 90 Scenes.
In List Mode, the LCD initially shows the List Name in the upper left and the List Number in the upper
right. Once a List is begun, the Individual Scene name will be displayed. The List Number shows
which of the 64 Lists is currently active. Only one List is active at a time. On the bottom row of the
LCD, the previous Scene in the list is shown on the left, the currently active Scene is shown in the
middle, and the next Scene is shown on the right. In this way, the user is always aware of what scene
will be activated using the Previous and Next footswitches.
When a list is loaded intially, no scene is active and the word “Start” is displayed in the center of the
LCD. Press the Next footswitch to enter the list.
When the first scene in a list is active, the word “Start” will be displayed in the lower left of the LCD:
To Next Page
Loading...
