Source Audio Soleman - Scene Mode Navigation; Scene Search Functionality; Favorite Scene Access

SA165 Soleman User’s Guide 9
is active, then the Soleman will jump to Scene 0. If the Previous footswitch is pressed when Scene 0 is
active, then the Soleman will jump to Scene 127.
External expansion footswitches, if connected, can also be used to change Scenes in the same
manner as the Previous and Next footswitches.
Scene Search
Press the Search footswitch to activate Scene Search mode. When Scene Search mode is active, the
Search LED will blink. This indicates that you can select other scenes using the Next and Previous
footswitches without sending out the corresponding MIDI messages. When the desired Scene is
selected, press the Search footswitch again. This will exit Scene Search mode and activate the Scene,
sending the corresponding MIDI message on the MIDI outputs. Note that while Search Mode is active,
all MIDI output (except MIDI clock) will be disabled.
When in Scene Search mode, press and hold either the Next or Previous footswitches to rapidly scroll
through Scenes.
Jump to Favorite Scene
In Scene Mode, the Favorite footswitch can be used at any time to jump to the user-defined Favorite
Scene. By default, the Favorite Scene is Scene 0.
When the Favorite Scene is activated, the following things will happen:
 The Favorite LED will be lit solid.
 The Favorite Scene’s corresponding MIDI message (a program change, by default) will be
sent from the MIDI outputs
 The LCD will display the name of the Favorite Scene on the first row, with the last active
Scene shown on the second row.
In order to jump back to the last active scene, simply tap the Favorite footswitch one more time.
Alternatively, tap the Previous or Next footswitch to exit favorite mode and select a new Scene.
C
l
e
a
n
A
m
p
S
o
u
n
d
L
a
s
t
:
3
0
0
Favorite Scene Name
Favorite Scene
Number
Last Active
Scene