ADMIN, USER1, USER2, USER3:
Selected Checkbox: The user can access the function.
Blank Checkbox: The user can not access the function.
Options are ADMIN, USER1, USER2 and USER3.
Select USER PASSWORD using the mouse or the control button on the remote control
and press SEL button. Select user type and enter the current password. And, enter a
new password, enter the same password again to confirm and select OK. Then the
message “PASSWORD CHANGED” is displayed.
The factory default password is 1111.
It is highly recommended to assign a new password to protect the system.
Set authority level of playback on each user.
Checked box: authorized to playback. Blank check box: no authority.
To Next Page
Loading...
