Spectra Precision Focus 8 Series - Page 50

4 Checking and Adjustment
48 Spectra Precision Focus 8 Series Total Station User Guide
Second step
1. Sight the second target that is placed more
than 30 degrees above the horizontal
plane.
2. Tap [OK] to take angle measurements in
the following order:
– Face-2 to P2
– Face-1 to P2
– Face-1 to P1 (Horizontal)
– Face-2 to P1 (Horizontal)
– Face-2 to P2
– Face-1 to P2
– Face-1 to P1 (Horizontal)
– Face-2 to P1 (Horizontal)
– Face-2 to P2
– Face-1 to P2
 

  
  
 
 