Spectra POWERBOX 410 Series - 6.7 Installing a PB-400-PoE Daughterboard Module

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
103
6.7 Installing a PB-400-PoE Daughterboard Module
1. If you use RJ45 PB-400-LAN, please paste the shading tape to the place which was marked
by red circle. If you use PB-400-LAN-M12 Module please skip this step.
(Note: Do not make the tape block the LED.)
2. Insert the CMI-LAN Module for Spectra PowerBox 410 vertically to the female connector
(BTB_FH2 or BTB_FH4) on system’s mainboard until it is connected firmly, and fasten 4
copper pillars to fix it. (PB-400-LAN-M12 module is taken as the installation example in this
chapter)
ModelNo. Description
PB‐400‐PoE
Daughterboard
CFMModulewithPoEControlFunction,IndividualPort25.5W