Spectra POWERBOX 410 Series - 3.2.2 Installing SO-DIMM Memory

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
36
1. Locate the SODIMM socket on the top side of system.
2. Insert a SO-DIMM module at a 45 degree angle until its edge connector is connected to
SO-DIMM socket firmly.
3.2.2 Installing SO-DIMM Memory
3. Press down the module until the retaining clips snap back in place.
Lower socket
Upper socket
Lower socket
Upper socket
45°
45°