Spectra POWERBOX 410 Series - 6.8 Installing a PB-400-IGN Power Ignition Module

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
107
1. Locate the IGN connector on the bottom side of system.
2. Fasten 1 copper pillar before insert IGN module.
6.8 Installing a PB-400-IGN Power Ignition Module
ModelNo. Description
PB‐400‐IGNV1.5
CFMModulewithPowerIgnition SensingControlFunction,12V/24V
Selectable