Spectra POWERBOX 410 Series - 6.3 PB-400-IGN Module Switches Definition & Settings

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
94
6.3 PB-400-IGN Module Switches Definition & Settings
SW2: IGN Module Timing Setting Switch
Pin 1 Pin 2 Pin 3 Pin 4 Definition
ON ON ON
ON (IGN enabled)
/
OFF (IGN disabled)
0 second
ON ON OFF 1 minute
ON OFF ON 5 minutes
ON OFF OFF 10 minutes
OFF ON ON 30 minutes
OFF ON OFF 1 hour
OFF OFF ON 2 hours
OFF OFF OFF Reserved (0 second)
Set shutdown delay timer when ACC is turned off
Pin Definition
1-2 24V Car Battery Input (Default)
2-3 12V Car Battery Input
24V_12V_1: IGN Module Voltage Mode Setting Switch
12V / 24V Car Battery Switch
OFF
ON
Default setting of Pin1 to Pin4 is ON/ON/ON/OFF.
ModelNo. Description
PB‐400‐IGNV1.5
CFMModulewithPowerIgnition SensingControlFunction,12V/24V
Selectable