Spectra POWERBOX 410 Series - 3.4 Installing Components at Front Side; 3.4.1 Removing the Front Cover Plate; 3.4.2 Installing a SATA Hard Drive at Front Side

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
42
3.4.2 Installing a SATA Hard Drive at Front Side
1. Loosen 2 screws on front panel to remove cover plate.
3.4 Installing Components at Front Side
1. Locate the removable HDD bay and loosen the screw.
3.4.1 Removing the Front Cover Plate
Note: It’s advised to fasten the 2 screws manually. If fastened with an electrical screw
driver, please set the torque of the driver to 2.5 KgF.