Spectra POWERBOX 410 Series - 3.2.4 Installing Antennas

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
38
3.2.4 Installing Antennas
1. Remove the antenna rubber covers on rear panel.
2. For antenna 1 and antenna 2, please penetrate the antenna jack through the hole at both
sides as illustrated.
For antenna 3, please pull off the rear panel by loosening the 10 D-Sub jack screws on rear
panel firstly, and penetrate the antenna jack through the hole at both sides as illustrated.
Please installing a Mini PCIe Wireless Lan Card on top side before you
put on washer and fasten the nut with antenna jack.
CAUTION
3
2
1
Antenna 1 Antenna 2
Antenna 3