Spectra POWERBOX 410 Series - Page 39

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
39
3. For antenna 1 and antenna 2, put on washer and fasten the nut with antenna jack.
For antenna 3, put on rear panel back and fasten 10 D-Sub jack screws on it, and then put
on washer and fasten the nut with antenna jack.
4. Assemble the antenna and antenna jack together
5. Attach the RF connector at another end of cable onto the module.