Spectra POWERBOX 410 Series - 4.3.7 Hardware Monitor

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
67
 Serial Port [Enabled]
Enables or disables the serial port.
 Change Settings [Auto]
Allows you to change the IO Address & IRQ settings of the specified serial port.
 Onboard Serial Port 1~6 Mode [RS232]
Allows you to select Serial Port Mode.
Configuration options: [RS232] [RS422/RS485 Full Duplex] [RS485 Half Duplex]
Watch Dog Function
You can setup the system watch-dog timer, a hardware timer that generates a reset
when the software that it monitors does not respond as expected each time the
watch dog polls it.
■ Watch Dog [Disabled]
Enables or disables watch dog function.
■ Watch Dog Mode [Sec]
Allows to set watchdog timer unit <Sec> or <Min>.
■ Watch Dog Timer [0]
Allows you to set watchdog timer’s value in the range of 0 to 255.
4.3.7 Hardware Monitor
This screen displays the current status of all the monitored hardware devices/components
such as voltages, temperatures and all fans’ speeds.
■ External Smart Fan Function [Enabled]
Enables or disables External Smart Fan function.