Spectra POWERBOX 410 Series - 3.3 Assembling the System; 3.3.1 Installing Thermal Pad; 3.3.2 Installing Top Cover

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
40
Note: The Spectra PowerBox 410 series don’t need additional installation for the PCH thermal
pad.
3.3 Assembling the System
3.3.1 Installing Thermal Pad
1. Hold front and rear panel and put the body of unit back to chassis and fasten the 4
screws as marked on photo.
.
3.3.2 Installing Top Cover
Thermal pad