Spectra POWERBOX 410 Series - 3.1 Disassembling the System for Installation

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
29
1. Turn over the unit to have the bottom side face up, loosen the 6 screws of bottom cover and
place them aside for later use.
3.1 Disassembling the System for Installation
In order to prevent electric shock or system damage, before removing
the chassis cover, must turn off power and disconnect the unit from
power source.
WARNING
2. Remove the bottom cover from the chassis.