Spectra POWERBOX 410 Series - 5.1.1.6 DIO I;O Port Address; 5.2 (DIO) Hardware Specification

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
89
5.1.1.6 DIO I/O Port Address (Default Address 0xA00)
5.2 (DIO) Hardware Specification
DI8 DI7 DI6 DI5 DI4 DI3 DI2 DI1 PinDefinition
76543210 DataBits
DigitalInput DIO
0xA03 I/OPortaddress
DO8 DO7 DO6 DO5 DO4 DO3 DO2 DO1 PinDefinition
76543210 DataBits
DigitalOutput DIO
0xA02 I/OPortaddress
• XCOM+ : Isolated power in V+
• XCOM- : Isolated power in V-
• Isolated power in DC voltage : 9~30V
• 8x Digital Input (Source Type)
• Input Signal Voltage Level
- Signal Logic 0 : XCOM+ = 9V, Signal Low - V- < 1V
XCOM+ > 9V, V+ - Signal Low > 8V
- Signal Logic 1 : > XCOM+ - 3V
• Input Driving Sink Current :
- Minimal : 1 mA
- Normal : 5 mA
• 8x Digital Output (Open Drain)
- DO Signal have to pull up resistor to XCOM+ for external device, the
resistance will affect the pull up current
- Signal High Level : Pull up resistor to XCOM+
- Signal Low Level : = XCOM-
- Sink Current: 1A (Max)