Spectra POWERBOX 410 Series - Page 26

SpectraGmbH&Co.KG
vertrieb@spectra.de
UserManual
SpectraPowerBox 410Series
Version1.2
May2020
Pin Definition
1GND
2PWR_SW
26
CN1 / CN2: LAN1 / 2 LED Status Definition
DC_IN1: DC Power Input Connector (+9~48V)
Connector Type: Terminal Block 1x3 3-pin, 5.0mm pitch
Pin Definition
1 +9~48VIN
2 Ignition
3GND
PWR_SW2: Remote Power On/Off Switch Connector
Connector Type: Terminal Block 1X2 2-pin, 3.5mm pitch
Note: Please do not apply power to the pins. This port is used to connect a switch.
1 2
Act LED Status Definition
Blinking Yellow Data Activity
Off No Activity
Link LED Status Definition
Steady Green 1Gbps Network Link
Steady Orange 100Mbps Network Link
Off 10Mbps Network Link
Pin Definition
1GND
2 +12V
3 SENSE
4 Control
1 2 3 4
FAN1: External PWM Fan Connector
Connector Type: Terminal Block 1X4 4-pin, 3.5mm pitch