Spectrum DX3 User Manual

16
To enter the System Mode, press both the MODE and CHANNEL keys at the same time
while turning on the transmitter power switch. By pressing the MODE key, you can now
select the model name input, data reset function or channel 3 function as shown here on the
System Mode flow chart. Information for each function is located on the page number listed
next to the function name on the flow chart.
To exit the System Mode, press the
MODE and CHANNEL keys at the same time, or simply
turn off the transmitter.
Accessing the
System Mode
MD1
1
clr
1
FN3
ln
Model Name Entry (Page 17)
Date Reset (Page 18)
Channel 3 Function (Page 34)
–
-
-
-
-
-
-

Spectrum DX3 Specifications

General

Brand	Spectrum
Model	DX3
Category	Network Router
Language	English