Spectrum DX3 User Manual

18
The Data Reset function allows you to reset all the programming in the selected model (1,
2 or 3) to the factory default settings. Before using the Data Reset function, it’s important to
enter the Model Select function and check to make sure the current model number indicated
(1, 2 or 3) is the model to which you want to reset to the factory default settings. The Model
Select function is described in detail on page 23.
Accessing the Data Reset Function
To access the Data Reset function, follow the steps below:
Press the MODE key to access the
Model Name Entry function
MODE CHANNEL
ENTER
SYSTEM
Press the INCREASE or DECREASE
keys at the same time to reset (clear)
all settings for the selected model to
the factory default
INCREASE DECREASE
CLEAR
DIRECT
+ –
1. Press the MODE and CHANNEL keys at the same time and hold.
2. Turn on the transmitter power switch to enter the System Mode.
3. Press the MODE key once until CLR appears on the screen.
4. Press the INCREASE and DECREASE keys at the same time to reset the data. To
confirm that the selected model’s programming has been reset, a beep will sound and
the model number selected (1, 2 or 3) will stop flashing.
5. To exit the System Mode, either turn the transmitter power switch off or press the
MODE and CHANNEL keys at the same time.
Data Reset
(System Mode)
clr
1
Indicates model to be reset
–

Spectrum DX3 Specifications

General

Brand	Spectrum
Model	DX3
Category	Network Router
Language	English