Chapter 3: USB Sharing
If the printer was previously installed on this PC, then the driver should appear in
the list under the proper manufacturer and printer name.
If your driver does not appear, you will need to locate the correct driver and click
Have Disk to install it.
6. (Optional). You can choose to set this printer as your system Default Printer by
selecting the checkbox next to "Set as default printer." Click Next.
7. If everything is configured correctly, the Wizard will display the message, "You
have successfully completed the Add Printer Wizard." Installation can be
verified using the "Print Test Page" button. Click Finish to complete.
User Guide Model RAC2V1S 38
To Next Page
Loading...
Need help?
General
