SpeedyBee F405 WING MINI User Manual

SpeedyBee F405 WING MINI
User Manual V1.1
Pa1-OverView
Standard-Install Shield Board
Installation
standard Flight Controller orientation
Assembly Instructions
Custom-Install Shield Board
Installation inveed Flight Controller
Arrow indicates
drone head
PDB Board A
M2x 6.5 round
female-female
copper stando
M2X3+3 round
male-female
copper stando
M2X3.5 head
cross screw
Custom-Install
Shield Board
D
FC Board B
Standard-Install
Shield Board
C
M2X3+3 round
male-female
copper stando
M2x 6.5 round
female-female
copper stando
M2X3.5 head
cross screw
PDB Board
A
FC Board B
Standard-Install
Shield Board
for standard Flight
Controller orientation
A
Custom-Install Shield Board
for inveed Flight Controller
B
C
D
Specication Oveiew
Product Name SpeedyBee F405 WING MINI
PDB Board
FC Board
Shield Board
Wireless USB
Extender
Wireless
Conguration
FC Firmware
Power Input
Dimension
Weight
SpeedyBee F405 WING MINI FC Board
SpeedyBee F405 WING MINI
Custom-Install Shield Board
SpeedyBee F405 WING MINI
Standard-Install Shield Board
SpeedyBee F405 WING MINI
USB Extender
SpeedyBee F405 WING MINI PDB Board
Bluetooth BLE/WIFI(AP)/WIFI(STA)
INAV/ArduPilot
2-6S
37(L) x 26(W) x 14(H) mm
19g（Wireless USB Extender included）
SpeedyBee APP Installation Facebook
1.Assemble A (PDB Board) and B (FC Board), align pins, inse,
and secure with screws and bolts.
2.For standard Flight Controller orientation, assemble
C (Standard-Install Shield Board).
3.For inveed Flight Controller, assemble
D (Custom-Install Shield Board ).

SpeedyBee F405 WING MINI Specifications

General

Flight Controller	SpeedyBee F405 WING MINI
Processor	STM32F405
IMU	MPU6000
Gyro	MPU6000
Barometer	BMP280
OSD Chip	AT7456E
Flash Memory	16MB
Blackbox	Yes
RSSI	Yes
SmartPort	Yes
USB	Type-C
Built-in OSD	Yes
Bluetooth	No
Firmware	INAV
I2C	1 Set
ESC Signal	DShot, PWM

Summary

Specification Overview

Part2-Hardware Description

FC Board Front

Overview of the flight controller board's front layout and connectors.

FC Board Back

Details the rear side of the flight controller board, including connectors.

USB Extender Front

Describes the front interface of the USB extender module.

PDB Board and Connections

PDB Board Layout

Details the front and back layouts of the Power Distribution Board (PDB).

Peripheral Connection Methods

Explains how to connect peripherals using plug-and-play and soldering methods.

Method 2, Soldering

FC Front Soldering Connections

Illustrates soldering connections on the front of the FC board.

Power Supply Configuration

Details the power supply options and jumpers on the FC and PDB boards.

Part 3 - Firmware Upgrade and APP Connection

Firmware Upgrade Process

Step-by-step guide for updating the flight controller firmware via computer.

Wireless APP Connection

Instructions for connecting the FC to mobile apps via Bluetooth or Wi-Fi.

Supported Firmware and Configurations

Lists compatible firmwares and recommended wireless modes for INAV/ArduPilot.

Part4-Specifications

Part5-Pin Mapping

INAV Pin Mapping

Detailed pinout for INAV firmware, showing UART, PWM, ADC, I2C connections.

ArduPilot Pin Mapping

Detailed pinout for ArduPilot firmware, showing UART, PWM, ADC, I2C connections.

Part6-Standard Settings

FC Inverted Installation Settings

Configuration for inverted FC mounting in INAV and ArduPilot.

Receiver Connection and Settings

Guides for connecting ELRS/TBS and SBUS receivers in INAV/ArduPilot.

GPS Module Connection and Configuration

Steps for connecting and configuring GPS modules for navigation and telemetry.

Compass Module Setup

Instructions for connecting and configuring the compass for accurate heading data.

Analog VTX Configuration

Settings for connecting and configuring analog Video Transmitters.

Dual Camera Switching Setup

Configuration for enabling and switching between two cameras.

PPM Receiver Setup

Digital VTX Settings

Wireless Board Configuration