Spencer BOB - Technical Data and Components; Technical data; Components

7
 The operation of any movement of the device when the vehicle is running, could result in extremely violent movements in case the
vehicle has an impact. It is recommended to make the adjustments only when the vehicle is not moving.
8. TECHNICAL DATA AND COMPONENTS
Note: Spencer Italia S.r.l. reserves the right to make changes to specifications without prior notice.
8.1 Technical data
Specifications
Dimensions
Length (mm)
2010 mm roller version
Presence of the slide increases overall length
Width (mm)
600 mm roller version
630 mm slide version
Stretcher support surface Height
210 mm with housing “Shaped” version
280 mm with double housing “Shaped” version
125 mm version “Slim” (Non shaped)
Surface extraction (if available in the purchased model)
670 mm
Sideways movement (if available in the purchased model)
300 mm
Weight
From 42 to 65 kg depending on model
8.2 Components
N°
Description
N°
Description
1
Slide (optional)
5
Front bumper
2
Extraction lever (if present)
6
Stretcher support surface
3
Sideways movement unlocking lever (if present)
7
Belt to fix spinal board/pick-up stretcher
4
Sideways movement unlocking lever (if present)
8
Gas spring