12/01/2016 Vers. 1.0 52
12 Data Base
The ATF S-Drive station is equipped with an internal database where you can find the necessary
data for replacing the oil concerning different vehicles on the market.
Select the needed vehicle to get information concerning:“Oil quantity” and “Oil code” to be charged on the vehicle,
“Connection Type” to be used.
The “Oil Code” and “Connection Type” fields can be modified by the operator and they will be stored in the memory
for later use.
The information related to “Oil quantity” will remain available in the memory for future uses during the Manual or
Automatic Oil Change procedures.
13 Oil Level
With this function you can add oil on the vehicle to bring the oil to the right level.
Place the plastic probe on the “Pressure” hose.
By pressing the arrow key UP , the oil is charged on the vehicle.
To Next Page
Loading...