To Next PageTo Next Page
Need help?Do you have a question about the Spin ATF 4500 and is the answer not in the manual?
The machine is covered by a warranty for 12 months from the date of delivery as long as the instructions in this manual are followed.
This symbol is used when failure to comply or misinterpretation of the instructions may result in personal injury.
Instructions for proper disposal of packaging, off-duty equipment, and battery waste.
This manual is about the use and maintenance of ATFS-DRIVE computerized automatic transmission washer station.
Ensure the mains voltage matches the rating plate and connect to a protected electrical outlet.
Guides operators on oil replacement for automatic transmissions, emphasizing circuit cleaning and used oil removal.
Lists the main technical specifications of the ATFS-DRIVE machine, including power, pumps, and functions.
Provides a description and identification of the main components of the ATF 4500 station.
Details the control panel's display, touch screen, pressure gauge, and flowmeters for operation.
Presents sets of fittings and pipes used to connect various car models to the ATFS-DRIVE station.
Outlines the three types of products recommended for the full transmission treatment process.
Preliminary operations before starting the procedure, including warming up the gearbox oil and identifying the transmission.
Ensuring the station is ready, including connecting to power and preparing the oil and washing fluid.
Instructions for filling the new oil tank with sufficient specific ATF, checking oil type and quantity.
Guidance on adding the appropriate washing fluid to the additive bottle, mixing it with new oil.
Details on connecting the ATF station's circuit to the vehicle using appropriate adapters and connection schemas.
Explains how to access the main menu and navigate through different operational modes on the station's screen.
Overview of operations performable within the manual procedure mode.
Operation to charge the washing fluid into the circuit to remove deposits and emulsions effectively.
Procedure to set and perform the washing cycle for the automatic gearbox, monitoring time and oil temperature.
Steps to drain used oil from the pan, indicating completion when air bubbles appear on the flowmeter.
Process for washing the radiator by loading new oil through the pressure hose until clean oil flows out.
Operation to remove used oil from the converter and transmission, replacing it with new oil automatically.
Procedure for adding a special additive to the circuit for optimal oil consumption and transmission longevity.
Steps to disconnect the ATF pipes and restore the car's original connections after satisfactory oil color.
Crucial step to verify the oil level in the transmission after operations before driving the vehicle.
Method for performing automatic transmission filter replacement and oil change without manual intervention.
Details the station's internal database for finding vehicle-specific oil quantities and connection types.
Function to add oil to the vehicle to achieve the correct transmission oil level using a plastic probe.
Allows setting a specific quantity of oil to be charged into the gearbox, with automatic pump stop.
Function for changing oil types, cleaning charge hoses, and preventing contamination between different oils.
Procedure to empty the internal used oil tank, with a note on tank overfill prevention.
Enables printing reports of the last performed operations, including additive usage and filter changes.
Phase similar to recirculation, used to bring oil to temperature or check coupling connections.
Function to replace the oil in the vehicle's power steering circuit.
Displays station information like software version, last maintenance date, and upcoming service needs.
Checks the calibration of the station's scales by placing a sample weight and verifying the readings.
Allows the user to change the current time and date settings on the station.
Activates or deactivates the 'Warm Up' function, waiting for oil to reach 40°C before proceeding.
This function enables the selection of the desired menu language for the station interface.
Provides the capability to update the station's software via a PC connection.
Enables setting the density (gr./lt.) for new and used oil, with automatic calculation available.
Instructions for cleaning the external filter when the station indicates 60lt of recovered oil.
Details residual risks such as machine overturning and direct/indirect contact with live parts.
General| Brand | Spin |
|---|---|
| Model | ATF 4500 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
