Getting Started
Logging in to the System
46 | Spirent Landslide Test System Installation Guide
Logging in to the System
After the Landslide system installation is complete, follow the procedure below to login to
the system for the first time.
Important: Do not attempt to access the Landslide Manager (TAS) until you have
installed and configured Java as instructed.
To log in to the system:
1 Configure the IP address and netmask of a laptop or workstation with an address that
can communicate with the Landslide Manager.
2 Open the client browser and enter the IP address or host name of the Landslide Man-
ager in the address bar. Press Enter or click Go to load the system’s home page.
3 Open the Help documentation using the User Guide link on the home page.
4 Follow the instructions in the Getting Started > Accessing the Test System >
Starting the Landslide Client Help topic to start the client application.
5 The system is delivered with one user account defined: the Super User. This is the
account that will be used for the initial login. In the Landslide Client window, enter
sms for the User Name and a1b2c3d4 for the Password, and then click Login.
If the login is successful, the main application window opens; otherwise, an error
message explaining the reason for the login failure is displayed.
Note: If this is your first login, the Software End User License Agreement (EULA)
dialog may appear. You must read and accept the EULA in order to proceed with
using your Landslide Test System. In all cases, including the non-appearance of the
EULA, continued use of the Landslide software is an implicit acceptance of the terms
and limitations of the EULA
Tips: • Disable any pop-up blocker or add the Landslide Manager to the list of
allowed sites.
• If you receive an error message stating that the server cannot be found, verify
that you entered the correct address, and that your platform is in, or has
access to, the Landslide Manager’s subnet.
• You must accept the EULA to access and use Landslide.
• Refer to the Managing Your System > About System Management online
Help topic for information about preparing the system for test operations.
To Next Page
Loading...