Getting Started
Adding Test Servers to the System
Spirent Landslide Test System Installation Guide | 47
Adding Test Servers to the System
Use the Test Server Administration window to add your test servers to the system
database.
Note: The C100 series and C50 series appliances are separately licensed and cannot be
combined to create mixed test systems.
Refer to Managing Your System > Test Servers > Operations and Maintenance >
Adding a Test Server and Deleting a Test Server online Help topics for detailed
instructions.
Installing the Tcl API
To install and use the Landslide Tcl API, refer to the Getting Started > How To Test >
Working with Tcl API > Using the Tcl API online Help topic for detailed instructions.
Securing the System
The default passwords for the Super User account and the cfguser account should be
changed after installation in order to secure the system.
The Super User password can be changed while logged in as the Super User. Follow the
procedure in the Managing Your System > Users > Changing Your Password Help
topic.
The cfguser account, which was used to access the configuration tools during installation,
is also used to access the TAS Manager and perform system maintenance. The password
for this account can be changed through the TAS Manager console. Refer to the
Managing Your System > System Maintenance Help topics for information on this and
other system management tasks.
Default Passwords
• The default password for the sms account is a1b2c3d4
• The default password for the cfguser account is cfguser
Important: If you change the passwords to your system, be sure to record them in a
secure location. The passwords are encrypted in the system memory, and Spirent cannot
recover them for you.
To Next Page
Loading...