Spirent Landslide EDGE E10 - General; Supported Nics and Ipsec Cards

Appendix A: Landslide Test Server NIC Configurations
General
50 | Spirent Landslide Test System Installation Guide
General
The Landslide appliance operating system discovers installed NICs and assigns logical
port names to the NIC ports in a specific order that cannot be overridden. This order is
dependent on number, location and type of NIC installed in the appliance. This discovery
and logical port assignment cannot be changed by the user.
Appliance NIC placement and port assignment is optimized to provide the best attainable
performance for the Landslide application.
Note: L-NIC-31A, L-NIC-32A, and L-ACC-006 IPSec accelerator card are discontinued
and included for reference only.
Supported NICs and IPSec Cards
Table A-1. Landslide NICs and IPSec Cards
Part
N u m b e r
Type Description Notes Configuration
Tables
L-NIC-31A Quad-port, 1Gbps
fiber Ethernet
server adapter
1 GbE, 10/100/1000Base-SX C50, C50-S4,
C100, C100-S2,
C100-M2, C100-
M4
All
L-NIC-32A Quad-port, 1Gbps
copper Ethernet
server adapter
1 GbE, 10/100/1000Base-T C50, C50-S4,
C100, C100-S2,
C100-M2, C100-
M4
All
L-NIC-31B Quad-port, 1Gbps
fiber Ethernet
server adapter
1 GbE, 10/100/1000Base-SX C50-S4, C100-
M4
Table A-2 through
Table A-10
L-NIC-32B Quad-port, 1Gbps
copper Ethernet
server adapter
1 GbE, 10/100/1000Base-T C50-S4, C100-
M4
Table A-2 through
Table A-10
L-NIC-27 Dual-port, 10
Gbps SFP+
Ethernet adapter
with custom
FPGA
10 GbE, SFP+ performance
interface with custom FPGA,
10GBASE-SR, 850 nm MMF
C50, C100,
C100-S2
Not supported by
C50-S4, C100-
M2, C100-M4
Table A-13 through
Table A-17
L-NIC-66 Quad-port, 10
Gbps SFP+
Ethernet server
adaptor
10 GbE, SFP+ 10GBASE-SR 850
nm MMF
C50-S4, C100-
M2, C100-M4
Table A-3 through
Table A-6
(M2 Only:
Table A-11 &
Table A-12)