Spirent Landslide EDGE E10 - Page 51

Appendix A: Landslide Test Server NIC Configurations
Supported NICs and IPSec Cards
Spirent Landslide Test System Installation Guide | 51
L-NIC-73 Dual-port, 25
Gbps, SFP28
Ethernet server
adaptor
25 GbE, SFP28 25GBASE-SR
(850nm MMF) &
25GBASE-CR (direct attach
twinaxial copper)
(SFP28 25GBASE-LR, 1310nm
SMF optics available)
C100-M4 only Table A-7 through
Table A-10
L-NIC-74 Dual-port, 40
Gbps, QSFP+
Ethernet server
adaptor
40 GbE, QSFP+ 40GBASE-SR4
(850nm MMF) &
40GBASE-CR4 (direct attach
twinaxial copper)
(QSFP+ 40GBASE-LR4,
1310nm SMF optics available)
C100-M4 only Table A-7 through
Table A-10
L-ACC-006 Legacy IPSec
Accelerator Card
Legacy IPSec Accelerator Card C50, C100,
C100-S2, C100-
M2
Table A-11 and
Table A-17
L-ACC-007 Basic IPSec
Accelerator Card
Basic IPSec Accelerator Card C50-S4, C100-
M4
Table A-2 through
Table A-10
L-ACC-008 High-performance
IPSec Accelerator
Card
High-performance IPSec
Accelerator Card
C100-M4 only Table A-2 through
Table A-10
L-ACC-6002 Optical
Transceiver SFP+
10GBASE-LR,
SMF 1310NM
SFP+ 10GBASE-LR 1310nm,
single mode fiber transceiver
L-NIC-66 only NA
L-ACC-6004 Optical
Transceiver
QSFP+
40GBASE-LR4,
SMF 1310NM
QSFP+ 40GBASE-LR4 1310 nm,
single mode fiber transceiver
L-NIC-74 only NA
Table A-1. Landslide NICs and IPSec Cards (continued)
Part
N u m b e r
Type Description Notes Configuration
Tables