SPORTSTECH sTread Lite - Page 37

37
DE
EN
STEP 3
• Connect the two connectors of the control unit.
• Slide the control panel B onto the two panel brackets C.
• Tighten the four fixing screws S2 (hexagon socket M8×16) with their washers S6.
4 x S2
4 x S6
(B)
(C)
(C)
S2
S2
S6
S6
STEP 4
• Slide the two plastic covers D onto the console brackets.
• Tighten the eight fixing screws S5 (Cross Recessed Truss Head Bolts M5×10).
• Finally, tighten the eight fixing screws at the base of the two support tubes.
(D)
(D)
S5
S5
8 x S5