SPRIANO® TECHNOLOGIES - www.spriano.it – spriano@terranova-instruments.com
a TERRANOVA® Srl brand - www.terranova-instruments.com - VAT IT07848810151
Factory & Sales: Via Gramsci 1 – 26827 Terranova dei Passerini (LO) – Italy
Head Office: Via Rosso Medardo 16 – 20159 Milano – Italy Ph: +39 0377 919119 – Fax: +39 0377 855720
Step 2 (Figure 18):
screw for seven turns the stop dowel F in order to block the sensor mechanism.
Step 3 (Figure 18):
for instrument having bottom part, screw the stud bolt A into the nut B until it stops;
insert the washer C into the stud bolt and screw the nut D until the contact with the
washer is reached.
Figure 18: transport security operations - Steps 2 & 3
To Next Page
Loading...
