SPRIANO SST50 - Page 38

OPERATING MANUAL
MN-SST50
ED-17-09
SPRIANO® TECHNOLOGIES - www.spriano.it – spriano@terranova-instruments.com
a TERRANOVA® Srl brand - www.terranova-instruments.com - VAT IT07848810151
Factory & Sales: Via Gramsci 1 – 26827 Terranova dei Passerini (LO) – Italy
Head Office: Via Rosso Medardo 16 – 20159 Milano – Italy Ph: +39 0377 919119 – Fax: +39 0377 855720
Pag. 38/48
Step 2 (Figure 27):
 maintaining in position the washer and the nut (C), insert the new electronic head;
 fix the nut (C) using key CH24;
 unscrew for seven turns the stop dowel (F) in order to enable the sensor mechanism;
 remove the top locking device A-C-D.
Figure 27: electronic head substitution – Step 2
Step 3:
 follow Step 3 (Figure 25) indicated in Displacer Substitution to set the zero value.
F
C